110V CW-3000 Industrial Water Chiller for CNC/ Laser Engraver Engraving Machine. Used for: It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine. Comprehensive reference to the international radiator - type cooling system; 2. Small thermolysis water cooler; 3. With completed water flow and over high temperature alarm functions; 4.Professional forced air - cooled radiator; 6. Equipped with alarm output port. Model: CW-3000DG Voltage: AC110V, 60Hz Power: 99W Current: 0.9A (AC100 - 120V) Tank Capacity: 8L. Amount of Cooling: 50W /? Way of Circulation: Water pump forces circulation.
Maximum Flow: 18L / min. Inlet and Outlet: External Dia.
10mm brass connector Protection: Flow alarm Package List: 1 × CW3000 Water Chiller Machine 1 × Power Line. Advantages: CW-3000 laser water chiller is suitable for small water cooling device; Provide stable working conditions for laser devices; Water can be used for a long time; High heat dissipating capacity and not easy to be blocked; Alarm output port can quickly protect sensitive components; Specific disconnection alarm securing protection; High cost performance, low failure rate; Cool Capacity is 50W /?
Forces circulation, 8L cooling tank capacity; It can extend the using life of laser tube and ensure the engraving effect better. Installation: Industrial cooling machine's installation is very simple, the new machine for the first time using, you can install it as following steps. Open the package and check the machine and all accessories.
Open the mouth screw on the top of machine, add cooling water (Please don't power the machine without water). Connect the inlet and outlet hose between water cooler and laser engraving machine. Connect the power cable, turn the power switch (Note: Don't let the water overflow). Check the radiator water level again (Keep the distance between water level and mouth is 80 - 150mm). Maintenance: Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation.You can use non - corrosive antifreeze if you are in the northern cold regions. A cooler water condition in the absence of electricity is prohibited! Location placed cooler should select a well - ventilated, dry environment, away from other heat sources.
Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm. Cooling machine no use for long time or in transport must keep emptying the cooling water. CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature.To protect the laser tube, cooling fan will suspend the work when the water temperature is low about 10? , and it will continue to work when the water temperature rose to higher about 20? The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance! We are not responsible for undeliverable address. X'mas or other reasons. We are always working according to international standards and serve our customers from all over the world. Taking the purpose of "meeting different requirements from our overseas customers". Your comments about our products are welcomed. We hope to have the opportunity to establish business relationships with you. Our goal is "providing you both high quality products and the best prices". Feedback is very important to us. It is impossible to address issues if we do not know about them!
Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 (Beijing China time) 1. If it's non-workdays, please kindly be patient and considerable to give us a little more time. It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine. Specification: Model: CW-3000DG Voltage: AC110V, 60Hz Power: 99W Current: 0.9A (AC100 - 120V) Tank Capacity: 8L Amount of Cooling: 50W / Dimension: 52.5x28x52cm(LWH) Way of Circulation: Water pump forces circulation Maximum Flow: 18L / min Maximum Pumping Lift: 9m Inlet and Outlet: External Dia. 10mm brass connector Protection: Flow alarm Package: 1 × CW3000 Water Chiller.
The item "110V CW-3000 Industrial Water Chiller for CNC/ Laser Engraver Engraving Machine" is in sale since Monday, January 11, 2021. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers". The seller is "youbaobostar" and is located in Los Angeles, New Jersey, Atlanta.This item can be shipped to United States.