Please confirm before place an order. Comprehensive reference to the international radiator - type cooling system; Small thermolysis water cooler; With completed water flow and over high temperature alarm functions; Enclosed water tanks; Professional forced air - cooled radiator; Equipped with alarm output port. Multiple power specifications; CE approval; RoHS approval. Is suitable for small water cooling device.
Provide stable working conditions for laser devices; Water can be used for a long time; High heat dissipating capacity and not easy to be blocked; Alarm output port can quickly protect sensitive components. It is designed for cooling the one CO2 glass laser tube under 80W of the. Its emitting rate is lower than 60%, you can choose CW5000 Water Chiller if you want the emitting rate higher than 60%. Specific disconnection alarm securing protection; High cost performance, low failure rate; Cool Capacity is 50W / °C; Forces circulation, 9L cooling tank capacity; It can extend the using life of laser tube and ensure the engraving effect better.
Radiator that forces the wind cooling. CW-3000 80W CO2 Laser Tube Water Chiller, AC110V, 220V. CW-3000H 0.8KW, 1.5KW Spindle Cooling Water Chiller, 1P 220V.
CW-3000HA Water Chiller, 0.8KW, 1.5KW Multi - heads Spindle Cooling, 1P. The cooling water circulation loop alarm causes and the work of the state table. Maintenance Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation.
You can use non corrosive antifreeze if you are in the northern cold regions. Our water cooling machine has S & A logo on the top of injection port. Fake cooler without the logo. Our water chiller has function of Intelligent temperature control. Fake cooler without this function.
This image is only to show the brand, specific parameters will vary depending on the model, please refer to the specifications table parameters prevail. Our water chiller has S & A logo on the outfall. Fake cooler without this logo. Industrial cooling machines installation is very simple, the new machine for the first time using, you can install it as following steps. Open the package and check the machine and all accessories.Open the mouth screw on the top of machine, add cooling water (Please dont power the machine without water). Connect the inlet and outlet hose between water cooler and. Connect the power cable, turn the power switch (Note: Dont let the water overflow).
Check the radiator water level again (Keep the distance between water level and mouth is 80 150mm). Caution A cooler water condition in the absence of electricity is prohibited! Location placed cooler should select a well - ventilated, dry environment, away from other heat sources.
Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm. Cooling machine no use for long time or in transport must keep emptying the cooling water.To protect the laser tube, cooling fan will suspend the work when the water temperature is low (about 10°C), and it will continue to work when the water temperature rose to higher (about 20°C). Wooden Box: There is total one carton box. 470mm x 270mm x 370mm (18.5" x 10.6" x 14.6). 590mm x 400mm x 490mm (23" x 15.8" x 19.3).
Caution: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance! The item "AC220V 50Hz CW-3000AG Industrial Water Chiller for 60With80W CO2 Glass Laser Tube" is in sale since Monday, November 7, 2016. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers".
The seller is "ussignage2015" and is located in Beijing. This item can be shipped worldwide.