CW-3000 8L Industrial Water Chiller For CNC Laser Engraver Engraving Machine. It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine.Comprehensive reference to the international radiator - type cooling system. With completed water flow and over high temperature alarm functions. Professional forced air - cooled radiator. Equipped with alarm output port. CW-3000 laser water chiller is suitable for small water cooling device.
Provide stable working conditions for laser devices. Water can be used for a long time.High heat dissipating capacity and not easy to be blocked. Alarm output port can quickly protect sensitive components. Specific disconnection alarm securing protection. Cool Capacity is 50W /? Forces circulation, 8L cooling tank capacity. It can extend the using life of laser tube and ensure the engraving effect better. Ndustrial cooling machine's installation is very simple, the new machine for the first time using, you can install it as following steps. Open the package and check the machine and all accessories. Open the mouth screw on the top of machine, add cooling water (Please don't power the machine without water). Connect the inlet and outlet hose between water cooler and laser engraving machine. Connect the power cable, turn the power switch (Note: Don't let the water overflow). Check the radiator water level again (Keep the distance between water level and mouth is 80 - 150mm). A cooler water condition in the absence of electricity is prohibited! Location placed cooler should select a well - ventilated, dry environment, away from other heat sources.
Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm. Cooling machine no use for long time or in transport must keep emptying the cooling water.
CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature. To protect the laser tube, cooling fan will suspend the work when the water temperature is low about 10? , and it will continue to work when the water temperature rose to higher about 20?1 × CW3000 Water Chiller Machine. 1 × Power Line (US Plug). Feedback is very important to us. It is impossible to address issues if we do not know about them!
Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.
Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Used for: It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine. Comprehensive reference to the international radiator - type cooling system; 2. Small thermolysis water cooler; 3.
With completed water flow and over high temperature alarm functions; 4. Professional forced air - cooled radiator; 6. Advantages: CW-3000 laser water chiller is suitable for small water cooling device; Provide stable working conditions for laser devices; Water can be used for a long time; High heat dissipating capacity and not easy to be blocked; Alarm output port can quickly protect sensitive components; Specific disconnection alarm securing protection; Cool Capacity is 50W. The item "CW-3000 8L Industrial Water Chiller For CNC Laser Engraver Engraving Machine US" is in sale since Tuesday, September 29, 2020. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers".The seller is "fashion-eshop-2010" and is located in Rowland Heights, California. This item can be shipped to United States.
: 10mm brass connector