110V Industrial Water Chiller Water Cooling Unit for Laser Tube Engraver Cutter. The machne has only the heat dissipation has no cooling function, only heat dissipation function, can not adjust the temperature. CW3000 is only suitable for heat dissipation of devices with relatively low power, such as lasers below 80W, UV lamps, CNC machines, and electric spindle cooling below 300W.W: 21Lbs / 9.5kg. CW-3000 Series is professional cooling machine referring to international, advanced thermolysis cooling system design, suitable for small water-cooled cooling devices requested machinery. Economic cooling equipment, easy to install and operate, compact and easily movable. It is designed for cooling the one CO2 glass laser tube of the laser engraving and cutting machine. Open the package to check if the machine is intact and all the necessary accessories are completed. Open the mouth screw on the top of machine, add cooling water (Please dont power the machine without water). According to system conditions, connect the water isnlet and outlet pipe well. Connect the power cable, turn the power switch (Note: Dont let the water overflow). Check the radiator water level again. Cooling machine no use for long time or in transport must keep emptying the cooling water.
It is strictly forbidden to plug and run the cooler without feeding water. Cooler should be placed in a well-ventilated, dry environment place and away from heat sources.Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 10cm between obstructions and air inlets of two sides. To ensure good heat dissipating, please open the lid to clean the dirt after the cooler used in long-term.
Working in cold north area, it is better to use noncorrosive. Remarks: CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature. Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.Food and Drug Administration and state and local regulatory agencies. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal.
We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Parameter Cooling: 50W/ Voltage: AC110V Max.
Lift: 10M Frequence: 60HZ Max. Flow: 10L/Min Current: 0.45A N. W: 21Lbs / 9.5kg Capacity: 9L G. W: 26Lbs / 12kg Protection: Flow Alarm size472737cm.
The item "Industrial Water Chiller CW-3000 110V for 80With300W CO2 Laser Tube/Engraver" is in sale since Wednesday, November 11, 2020. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers". The seller is "trinityranch88" and is located in Dayton, New Jersey.
This item can be shipped to United States.
W: 26Lbs / 12kg