S&A 110V CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser NEW

S&A 110V CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser NEW
S&A 110V CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser NEW
S&A 110V CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser NEW
S&A 110V CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser NEW

S&A 110V CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser NEW

S&A CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser, 3.67HP, AC 1P 220V, 60Hz. Description: S&A compressor refrigeration industrial water chiller CWFL-3000 with dual temp control function is produced by Guangzhou Teyu Electromechanical Co. S&A CWFL series chiller is special for cooling Raycus, IPG, Max, nLIGHT, trumpf, Rofin and SPI fiber laser.

CWFL-3000 chiller is special applied for cooling 3000W fiber laser which is able to cool the fiber laser and optic lense at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature.

With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes. 8500W cooling capacity; optional environmental refrigerant; 2. ±1°Cprecisely temperature control; The temperature range of S&A chiller is 5°C to 35°C, the controllable lowest water temperature depends on the heat load of cooled machine and cooling capacity of chiller. However, S&A suggest the best running temp is 20°C to 30°C for the chiller. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 7. The chiller supports the Modbus-485 communication protocol, which can realize the communication between the laser system and multiple chillers.

It can mainly realize two functions: to monitor the working state of the chiller and modify the parameters of the chiller. Multiple power specifications; CE, RoHS and REACH approval; 9.

Long working life and easy operation; 10. Optional heater and water filter. 1706Btu/h+26136Btu/h 0.5KW+7.66KW 430Kcal/h+6586Kcal/h. 0.55 KW+0.75 KW.

102X65X117 cm (L X W X H). 111X85X140 cm (L X W X H). The item "S&A 110V CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser NEW" is in sale since Wednesday, April 24, 2019.

This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers". The seller is "display-quick" and is located in BeiJing. This item can be shipped worldwide.


S&A 110V CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser NEW


Index  Archives  Contact Form  Privacy Policies  Terms of Use