US Stock, S&A CW-3000DG Thermolysis Industrial Water Chiller (AC110V, 60Hz) for Laser Engraver with 60W / 80W CO2 Glass Tube. Remarks: CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature. Please confirm before place an order.
Used for: It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving. Its emitting rate is lower than 60%, you can choose CW5000 Water Chiller if you want the emitting rate higher than 60 %. 0.9A (AC100 - 120V).Radiator that forces the wind cooling. Features: Specific disconnection alarm securing protection; High cost performance, low failure rate; Cool Capacity is 50W / ; Forces circulation, 9L cooling tank capacity; It can extend the using life of laser tube and ensure the engraving effect better. Comprehensive reference to the international radiator - type cooling system; Small thermolysis water cooler; With completed water flow and over high temperature alarm functions; Professional forced air - cooled radiator; CW-3000 laser water chiller is suitable for small water cooling device; Provide stable working conditions for laser devices; High heat dissipating capacity and not easy to be blocked. Details: Usage: Caution A cooler water condition in the absence of electricity is prohibited!
Location placed cooler should select a well - ventilated, dry environment, away from other heat sources. Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm. Cooling machine no use for long time or in transport must keep emptying the cooling water.
To protect the laser tube, cooling fan will suspend the work when the water temperature is low (about 10), and it will continue to work when the water temperature rose to higher (about 20). Maintenance Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation. You can use non corrosive antifreeze if you are in the northern cold regions. Wooden Box: There is total one carton box. 470mm x 270mm x 370mm (18.5" x 10.6" x 14.6).
590mm x 400mm x 490mm (23" x 15.8" x 19.3). Caution: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance! The item "S&A CW-3000DG Industrial Water Chiller for 60 / 80W Laser Engraving Machine 110V" is in sale since Monday, August 29, 2016.This item is in the category "Business & Industrial\HVAC & Refrigeration\Other HVAC & Refrigeration". The seller is "ussignage2015" and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.