US Stock, S&A CW-3000DG Thermolysis Industrial Water Chiller (AC110V, 60Hz) for Laser Engraver with 60W / 80W CO2 Glass Tube. Comprehensive guarantee for 2 years except the wearing parts.English user manual for machine using and maintain. E are authorized as "S&A" brand name product agent. Ll of S&A water chillers are certified with design patent.
S&A CW-3000 series thermolysis type water cooler has compact design, with energy saving, high cost performance, good protection and alarm system. Remarks: CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature. Please confirm before place an order. It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine. Its emitting rate is lower than 60%, you can choose CW5000 water Chiller if you want the emitting rate higher than 60 %.
Specific disconnection alarm securing protection. High cost performance, low failure rate. Radiating Capacity is 50W /. Forces circulation, 9L cooling tank capacity. It can extend the using life of laser tube and ensure the engraving effect better.Comprehensive reference to the international radiator - type cooling system. With completed water flow and over high temperature alarm functions. Professional forced air - cooled radiator. CW-3000 Laser Water Chiller is suitable for small water cooling device.
Provide stable working conditions for laser devices. High heat dissipating capacity and not easy to be blocked. 49X27X38 cm (L X W X H).
59X39X48 cm (L X W X H). Independent production of sheet metal and heat exchanger. 9L cooling tank, fast cooling. Adopt IPG fiber laser for welding and cutting sheet metal, adopt minimize risks of water and refrigerant leakage and improve quality. Ease of moving and water filling.
The firm handle can help move the water chillers easily. Inlet and outlet connector equipped.The laser will stop working once it receives alarm signal from the water chiller for protection purpose. High speed fan of famous brand installed. Adopt SAN JU brand from Taiwan with quality assurance and low failure rate. It is suggested to replace the cooling water(distilled water or purified water as cooling water) every 3 to 6 months.
Connection diagram between water chiller and laser machine. Water outlet of the water tank connects to water inlet of the laser machine while water inlet of the water tank connects to water outlet of the laser machine. Aviation connector of the water tank connects to the aviation connector of the laser machine. FLOW ALARM AND OUTPUT PORTS. In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-3000series water cooler possess a low flow alarm protection.
(1) Flow alarm output ports and the wiring diagram. Causes of the cooling water circulation alarm and the working condition table.Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V. Method of exchanging water in the water tank and the exchanging frequency. Method of exchanging water in the water tank.
Drain the waste water out of the water tank through the drain outlet and fill the clean water into the tank through the filling hole. S&A CW-3000 chiller for 3KW CNC spindle machine.
S&A CW-3000 water cooler for 60W co2 laser machine. S&A CW-3000 chiller for dual 1.5KW engraving machine. S&A CW-3000 chiller for 80W co2 laser cutting machine. S&A CW-3000 chiller for acrylic laser cutting machine. With 11 patent certificates and won Quality integrity Level A certificate; ISO 9001, CE, RoHS and REACH environmental certificated.
Conforms to air transport requirements, energy saving and environment friendly. 18,000 square meters brand new industrial refrigeration system research center and production base Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. Annual production capacity of 60,000 units , focus on large, medium and small power chiller production and manufacture. With excellent laboratory testing system, simulates actual working environment for chiller. Wooden Box: There is total one carton box.470mm x 270mm x 370mm (18.5" x 10.6" x 14.6). 590mm x 400mm x 490mm (23" x 15.8" x 19.3). Caution: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance! The item "S&A CW-3000DG Thermolysis Industrial Water Chiller (AC110V, 60Hz) CO2 Glass Tube" is in sale since Monday, October 10, 2016. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers".
The seller is "ussignage2015" and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.